Journal of Orofacial Sciences

ORIGINAL ARTICLE
Year
: 2018  |  Volume : 10  |  Issue : 1  |  Page : 37--41

The effect of incomplete crown ferrules on fracture resistance and the failure modes of endodontically treated maxillary incisors restored with cast posts, cores, and crowns


Krai Kaewtip1, Boonlert Kukiattrakoon2, Boonrat Sattapan3, Kewalin Thammasitboon3, Robert R White4 
1 Department of Dental Public Health, Sribunpot Hospital, Sribunpot, Phatthalung, Thailand
2 Department of Conservative Dentistry, Prince of Songkla University, Hat Yai, Songkhla; Dental Materials Research Unit, Faculty of Dentistry, Prince of Songkla University, Hat Yai, Songkhla, Thailand
3 Department of Conservative Dentistry, Prince of Songkla University, Hat Yai, Songkhla, Thailand
4 Department of Restorative Dentistry and Biomaterials Sciences, Harvard School of Dental Medicine, Boston, MA, USA

Correspondence Address:
Asst. Prof. Kewalin Thammasitboon
Department of Conservative Dentistry, Faculty of Dentistry, Prince of Songkla University, Songkhla 90112
Thailand

Introduction: The purpose of this study was to investigate fracture resistance and the fracture modes of endodontically treated teeth restored with cast posts and cores in the presence of various configurations of incomplete ferrules. Materials and Methods: Fifty maxillary anterior teeth were endodontically treated and divided into five groups (n = 10) according to ferrule design: group complete ferrule (CF) had a 2-mm circumferential ferrule; group buccal-mesial-palatal (BMP) had a 2-mm ferrule on the buccal, mesial, and palatal sides; group P had a 2-mm ferrule only on the palatal side; group B had a 2-mm ferrule only on the buccal side of the tooth; and group no ferrule (NF) had no ferrule. Each tooth was restored with a cast post, core, and a Ni–Cr crown. All specimens were lingually loaded at 135° to their long axis in a universal testing machine until fractured. Fracture patterns were recorded. Data were analyzed using one-way analysis of variance and Tukey’s honestly significant difference (Tukey�s HSD) test (α = 0.05). Results: The highest load to fracture was CF (534.33 ± 100.30 N), followed by BMP (467.71 ± 54.54 N), P (462.71 ± 54.92 N), B (330.48 ± 54.86 N), and NF (275.93 ± 28.35 N), respectively. There was no statistically significant difference in load to fracture among CF, BMP, and P and between B and NF (P > 0.05). Conclusion: A tooth with incomplete ferrule had lower fracture resistance than one with complete ferrule, but it was still higher than one with no ferrule. The presence of a palatal ferrule was more effective than a buccal ferrule in providing fracture resistance to palatal occlusal loads.


How to cite this article:
Kaewtip K, Kukiattrakoon B, Sattapan B, Thammasitboon K, White RR. The effect of incomplete crown ferrules on fracture resistance and the failure modes of endodontically treated maxillary incisors restored with cast posts, cores, and crowns .J Orofac Sci 2018;10:37-41


How to cite this URL:
Kaewtip K, Kukiattrakoon B, Sattapan B, Thammasitboon K, White RR. The effect of incomplete crown ferrules on fracture resistance and the failure modes of endodontically treated maxillary incisors restored with cast posts, cores, and crowns . J Orofac Sci [serial online] 2018 [cited 2020 Oct 22 ];10:37-41
Available from: https://www.jofs.in/article.asp?issn=0975-8844;year=2018;volume=10;issue=1;spage=37;epage=41;aulast=Kaewtip;type=0